How to fix the electric blast oven

Published:

2022-03-07

The current electric oven includes a cabinet body and a cabinet door. The main body of the shell is provided with a plurality of longitudinal partitions. The longitudinal partitions have a plurality of drying chambers in the main body of the shell. The exhaust pipe is fixed at the upper part of each drying chamber, the support frame is fixed at the upper part of the cabinet, the fan is fixed in the frame of the shell, the collection hood and each drying chamber are fixed at the outlet end of the fan, and the air duct is connected through the air duct. The electric cabinet is fixed on the outside of the cabinet body, and the electric cabinet and electrical components are electrically connected in each drying chamber. Now, the new oven is simple and easy to use. It can separate and dry different materials. The drying space is relatively independent and does not affect each other. It can be used for drying operations at the same time. It can control independent flow ventilation. Different materials are used. This parameter improves the drying efficiency, and can be observed by placing transparent glass windows in the drying chamber. Nowadays, the new type of oven includes an oven, which includes a frame and a main box arranged at the upper end of the frame. The main body of the partition is vertically provided with a partition, which divides the partition into two cavities on the left and right. The left cavity is provided with an air inlet pipe, and the right cavity is provided with a drainage pipe, which also includes a circulating fan. The circulating fan is arranged below the box, and the air inlet of the circulating fan is connected to the lower wall of the left cavity, as well as the outlet of the circulating fan, The circulating fan air and the right side cavity are set and connected with the lower wall. Now, the new split convection oven uses the space below the oven to reduce the space occupied by the oven. On the other hand, when the circulation fan of the oven breaks down, it is convenient for employees to maintain. With the increasingly strict environmental protection requirements of the industry, it is necessary to carry out technical transformation on the gluing parts. Today's designed oven is based on the principle of radiation heating. The semi gilded electric heating tube is combined with the hot air circulation system, replacing the heating method of the original electric heating tube, which improves the production efficiency, saves production space, and solves the heating problem, Therefore, the heating process will not produce polluting gas emissions.