What are the installation requirements for continuous film coater
The effective application of the continuous film coater today solves the technical problem of non-uniform coating of the existing coater. The continuous film coater includes a front roller and a back roller, which can be operated and moved between the front roller and the back roller. The surfaces of the front roller and the back roller are respectively provided with material grooves along their circumferential directions, the two ends of the base are respectively wound around the grooves of the front roller and the back roller, and the outer surface of the substrate is provided with annular grooves along the longitudinal direction of the substrate, And a material storage barrel is arranged above the front roll.
In addition, the periphery of the base between the front roll and the rear roll is provided with an oven, a reel, and one side of the rear roll. The current continuous film coater can effectively avoid the segregation and adhesion of the slurry during the coating process. The outer surface of the roll body is arranged on the central axis of the roll body, the roll body is arranged on the outer surface of the roll body, and the roll body includes a circular roll which is uniformly arranged on the peripheral surface. The central line of the circular roll is parallel to the circular roll, The release layer consists of the base layer and the stripping strip fixedly connected to the base layer. The base layer is in close contact with the groove of the round roller, and the adhesion of the residual adhesive is prevented from leading to the use of the coating machine.
In the practical application of the coater, we learned that the cleaning solution filtering device for the linear coater, including the bottom of the cleaning tank for the cleaning solution in the linear coater, is connected and arranged on the container body, at least the filter membrane in the container body, and the delivery pipe for delivering the filtered cleaning solution to the cleaning tank, as well as the corresponding method and the linear coater, can filter the cleaning solution in the linear coater through the implementation of the practical application, Improve the service life of the cleaning solution and improve the coating effect.
At present, the quick drying coater has a support column fixed on the base. The motor is installed in the middle of the rotary table, the support device is installed around the rotary table, and the liquid storage tank is installed on the right side of the rotary table. Since the coater device is installed on the lower coater device, the coater device is installed on the lower coater device, and the motor is operably connected to the lower wheel through the belt.