How to adjust the new motor coater

Published:

2022-03-07

The new electric coater now includes the support column of the control panel of the coater main body, the fixed base of the coater is set at the bottom of the coater, the internal fixed base of the coater is set with the expansion column of the expansion column, the fixed buffer washer is set at the outside, the side door of the coater is set on the surface of the coater main body, and the coater column is set at one side of the control panel of the coater, At present, the fixed base of the medium-sized coating machine can be adjusted according to the processing needs, with a wider scope of use and less restrictions. Therefore, the fixed buffer washer can be stretched. In the process of shrinking and reducing the pressure, the new control panel shaft can be adjusted according to the specific needs. It can be operated in many ways. Therefore, the mixing shaft of the coater is connected to the bottom of the mixing motor. Mixing impellers are set on both sides of the mixing shaft. A heater is installed on the left side of the dyeing box. Open the connection between the dyeing box and the back of the coater body, The feed inlet is provided with a water outlet at the bottom of the dyeing box and on the coating body. A discharge pipe is installed on the right side of the dyeing box, and a booster pump is installed in the middle of the discharge pipe. The return valve can facilitate users to clean the dyeing box and discharge sewage. Since the top side of the console is equipped with a tensioning frame, a regulator is installed at the side of the tensioning frame, a nozzle is installed at the bottom of the nozzle, a pressure roller is installed inside the coating support, and an electric telescopic rod is installed below the liquid storage tank. A drying box is installed at one side of the cloth support. Now the head and coating support are provided. Single or double coating can be selected, and the coating surface can also be selected for single coating. The height of the coating can be changed by using the electric telescopic rod and changing the height of the adjustable liquid storage tank. The rack and drying oven can be adjusted by tensioning the frame. The drying oven can be dried immediately after coating, as well as the front coating mechanism including the front coating mechanism. The steel roller and the front coating head are used to wind the substrate, the front coating head is placed on one side of the substrate, and the reverse coating mechanism includes the reverse coating head and the pressure roller assembly.