How does the coating machine of sensitive material plate with vibration device work

Published:

2022-03-07

The equipment now used to produce photosensitive materials is called a photosensitive material plate coater with a vibration device, including a frame. The frame is provided with a coating roller and a conveying roller, as well as a photosensitive liquid solution under the coating roller. The photosensitive material plate or substrate is transmitted from the back to the front on the frame, and the photosensitive material sheet is wound on the conveying roller. The path through which the photosensitive material plate passes is the front path coating roller. The two sides of the frame are provided with square grooves, A vibrator is installed below the groove. Since the axis of the coater is perpendicular to the path of the photosensitive material plate, the coater contacts the path of the photosensitive material plate, the vibrating roller shaft is installed on the vibrator, and the vibrator vibrates the roller shaft up and down. The advantage of this photosensitive material sheet coater is that the photosensitive material plate made of the photosensitive material plate is more uniform, so the product quality is better. The current solvent-free coater belongs to the technical field of coaters, The direction of the idler wheel passes through the interior of the coating unit, and the coating roller of the coater evenly smears the glue on the surface of the substrate. Then the base plate moves to the composite unit, and the base plate in the unwinding unit also passes through the composite unit. The composite unit closely combines the two base plates through glue. The composite base plate moves to the tension adjusting mechanism, which adjusts the tension of the base plate, and then the base plate moves to the right to the winding unit, thus effectively saving production costs. At the same time, the coating roller can evenly apply glue on the surface of the base material, Effectively improve the quality of the base material composite, and the shape of the bayonet is fixed on the bracket to facilitate the replacement of the unwinding device. At present, the coating mechanism of the coater includes a base. The coater device is installed on the base, and the device is set above the base. The air outlet of the device faces the film from the coating head. There is a return air duct above the machine base. The air inlet of the return air duct is separated from the air outlet of the equipment. The return air duct sends hot air to the heating package through the fan, and the air outlet of the heating package sends hot air to the equipment through the duct.