How to fix the air floating oven?

At present, the air floating oven is composed of cabinet door and cabinet door. The main body of the shell is provided with several vertical partitions, and the vertical partition has several drying chambers in the main body of the shell. The exhaust pipe is fixed at the upper end of each drying chamber, the fixing bracket is fixed at the upper end of the cabinet door, the cooling fan is fixed in the shell frame, the collection hood and each air drying chamber are fixed at the inlet and outlet of the cooling fan, and the ventilation pipe is connected according to the ventilation pipe.

The electrical control cabinet is fixed on both sides of the server cabinet body, and the electrical control cabinet is connected with the electrical components and electrical equipment in each drying room. Now, the new type of oven has a simple and practical structure, and can separate different raw materials from the drying chamber. The relativity of the drying room space can harm each other independently, can be used for the actual operation of air drying, can control the separation fluidity and natural ventilation, and can select different raw materials. This main parameter improves the drying efficiency, and can observe the drying room according to the full transparent window placed.
Today, new types of ovens include ovens, while air floating ovens include main ovens at the upper end of the structure and layout. The actor of the diaphragm is vertically provided with a diaphragm, which divides the diaphragm into left and right inner cavities. The left inner chamber is equipped with an air inlet, the right inner chamber is equipped with a drain pipe, and the cooling fan of the circulating system is also installed. The cooling fan of the circulating system is set directly below the shell, the air inlet of the cooling fan of the circulating system is connected with the lower wall of the left inner chamber, and the inlet and outlet of the cooling fan of the circulating system are respectively set with the cooling fan gas of the circulating system and the right inner chamber, which are connected with the lower wall. Now, the new separate thermal convection oven uses the indoor space directly below the oven to reduce the indoor space occupied by the oven.
On the other hand, when the cooling fan of the oven circulation system has common faults, it is convenient for employees to maintain. With the increasingly strict environmental protection regulations in the manufacturing industry, it is necessary to carry out technical innovation projects for dispensing components. According to the basic principle of radiation source heating, the oven designed today is closely combined with the heating and breathing system, replacing the original heating method of single product heating tubes, improving productivity, saving indoor space for production and manufacturing, and solving the heating problem. Therefore, the entire heating process is not easy to cause environmental pollution and gas pollution.
The temperature in the air flotation oven is caused by the work of the electric heating wire R. In order to maintain the temperature control of the air flotation oven, the electric heating wire must stop working after the temperature rises to the preset value; The heating wire cannot continue to work until the temperature decreases slightly. Frankly speaking, the temperature control of the oven is kept within the set range through the positive connection and disconnection of the key switch power supply. The on-off of the switching power supply depends on the pull in and release of the automobile relay contacts, and the attitude of the automobile relay is controlled by the rectifier grid. Therefore, whether the rectifier tube works normally to a certain extent will immediately endanger the pickup and release of automobile relay contacts.